Huawei C8813 မွာ ၁၅၀၀ MEC SIM Card မသိေတာ့တဲ့ Error ေျဖရွင္းနည္း

ကၽြန္ေတာ္တို႔ Huawei C8813 မွာ firmware update လုပ္မိလို႔ Build Number ျမင့္သြားရင္ 1500 တန္ MEC Sim Card ကို မသိေတာ့ပါဘူး။ Build Number က B175 ျဖစ္သြားရင္ အမ်ားဆံုးျဖစ္တတ္ပါတယ္။ အဲဒီလိုျဖစ္သြားရင္ Build Number B169 ကို downgrade ျပန္ဆင္းရပါတယ္။ ပံုမွန္ B169 dload file နဲ႔ downgrade ျပန္ဆင္းလို႔မရပါဘူး။

ေအာက္ကဖိုင္ေလးကို ေဒါင္းပါ။
ရလာတာကို ျဖည္ခ်ေပးပါ။ အထဲက UPDATE.APP ကို dload ဆိုတဲ့ folder ထဲ ထည္႔ၿပီး micro sd card ထဲကူးထည္႔ပါ။ ပံုမွန္ Huawei firmware တင္သလို Volume -,+,power ခလုတ္သံုးခုႏွိပ္ၿပီး တင္လိုက္ပါ။
ကဲ...ၿပီးရင္ေတာ့ Huawei C8813 B169 firmware ေလးကို ေဒါင္းၿပီး အထဲက dload ေလးနဲ႔ firmware downgrade လုပ္လို႔ရပါၿပီ။ အားလံုးၿပီးလို႔ Build Number B169 နဲ႔ firmware တက္လာရင္ 1500 MEC Sim Card ကို သံုးလို႔ရပါၿပီ ခင္ဗ်ာ။



downgrade ဆင္းႏိုင္ဖို႔အတြက္ ေအာက္ကဖိုင္ေလးကို ေဒါင္းပါ။

Download Huawei C8813 sim fail

C8813 B169 firmware ကိုေတာ့ ေအာက္မွာေဒါင္းပါ။

Download Huawei C8813 B169 firmware

share ျမန္ေအာင္သား

How to root Samsung Galaxy Mega 5.8 and install CWM Touch Recovery

Prerequisite:

1. Make sure your mobile should have 70 to 80% battery.
2. Enable USB debugging mode (Menu (app drawer) > Settings > Manage Applications > Development > USB Debugging – check box).
3. Ensure that you have backed up your all important data.


Requirements:



1. Download and install Samsung Galaxy S3 USB Drivers (Download USB drivers or download Samsung Kies (drivers included))
2. Download “Odin“.
3. Download “CWM Touch Recovery“.
4. Download “SuperSu“.
5. Download “Stock Recovery”

install CWM Touch Recovery :

1. Download all files on your computer .

2. Extract “Odin.zip” on the desktop and place “CWM Touch Recovery for Samsung Galaxy Mega 5.8” in it.
3. Now boot your phone into Download Mode

4. Open “Odin.exe” (from extracted folder) and connect your phone via USB cable to your computer in download mode. If your phone is connected successfully the one of the ID:COM boxes will turn yellow/green.

5. Click on “PDA” button and select file “.tar.md5” (from extracted folder).
6. Now, click on the Start button on Odin to start the installation process.
7. when the installation process is completed successfully you will see the “PASS” message on Odin and then your device will reboot automatically. Now, you can disconnect your phone from computer.

((Finish You have successfully installed CWM Touch Recovery))

(Note: If in case CWM Recovery doesn’t work for your device then you can flash “Stock Recovery” via above method only, just by replacing “PDA” file.)

-------------------------------------------------------------------------

root :

8. Place “SuperSU” file in external/internal memory of your device.
9. Now, boot in to recovery mode by pressing and holding “Volume Up + Home Button + Power Button“.
10. In recovery menu, choose “install zip from SD card” > Give a path to “SuperSu” file from an internal/external SD card > Give “Yes” to confirm to root Samsung Galaxy Mega 5.8.
11. When the installation process is completed select “++++Go Back++++” and then choose “reboot system” to reboot your phone.


FINISH now your phone is ROOTED

How To Update Samsung GT-I9152 Galaxy Mega 5.8 Duos Firmware Version To A Newer One Manually

Learn here how you can use the original Odin flasher and a Stock firmware package to update the firmware version of your Samsung Galaxy Mega 5.8 Duos model, This Guide will show you everything in details from downloading the files and programs to performing the update by yourself.

The Samsung Galaxy Mega 5.8 Duos GT-I9152 comes with Android 4.2.2 Jelly Bean installed, But that doesn't mean that it will not get a newer Android version or even a newer release, So that you should learn how you can update it manually, Also you can use this guide to reflash your device in case you have any software errors or problems and install a fresh copy into it.

Downloads:
- Samsung GT-I9152 Galaxy Mega 5.8 Duos Official Firmware Package.
- Odin Flasher.
- USB Drivers for Samsung GT-I9152 Galaxy Mega 5.8 Duos.

After downloading the above files extract the zipped ones (The firmware package and Odin program), Then install the USB drivers and restart your computer after that, When you are done move to the next steps.

Tools you will need to perform the update:
- Suitable USB cable for Samsung GT-I9152 Galaxy Mega 5.8 Duos, You can its original one.
- A stable computer running Windows OS.

Before Starting: Keep in mind that you are doing this update at your own Risk, And we are not responsible for any error or damage that could happen during the update.

Samsung GT-I9152 Galaxy Mega 5.8 Duos Firmware Update Steps:

- Make a backup of your device data (Contacts, Messages, Notes,...etc).

- Charge your device battery to be at least at 90% of charging level.

- Turn off the device.

- Take out the SIM and Memory cards.

- Run Odin.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: crater.pit

- Now you have to select the firmware files from the extracted firmware folder:

Click Bootloader button to select: BOOT_I9152xxxxxx_REV03A.tar.md5
Click PDA button to select: CODE_I9152xxxxxx_..._REV03A_user_low_ship.tar.md5
Click Phone button to select: MODEM_I9152xxxxxx_REV03A.tar.md5
Click CSC button to select: CSC_Oxx_I9152Oxxxxxx_..._REV00_user_low_ship.tar.md5

- Put your Samsung GT-I9152 Galaxy Mega 5.8 Duos into Download Mode:

Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.

- Connect the phone to computer using the USB cable.

- Wait until Windows detects the device and install its drivers.

- If Odin detects the connected device correctly you will see its COM port number (0:[COMxx]).

- Click on Start button.

- Odin will start to update your phone using the selected firmware files one by one.

- The phone will be rebooted after completing the update.

- If the update was successful you will see PASS! Word at Odin's window.

- Disconnect the USB cable from phone.

- When the device is fully on you can check the new firmware version (*#1234#).

- Turn the device off again.

- Insert your SIM and Memory cards into the device.

- Turn the phone on.

- In case you make a backup of your phone's data then you can restore it again.

- Congratulations, You have updated your Samsung GT-I9152 Galaxy Mega 5.8 Duos to a new firmware version.

Notice: When you get one big file inside the firmware package, Then it should be selected as a PDA file only, And do not check Re-Partition option or use PIT file at all.

CDMA 450 Phone ေတြကို Software ေရးဖို႔ QPST Tool

CDMA 450 Phone ေတြကို Software ေရးဖို႔ QPST Tool

ကၽႊန္ေတာ္သိတာေလးေတြကို ျပန္လည္မွ်ေ၀ေပးလိုက္ပါတယ္ အားလံုးပဲအဆင္ေျပေအာင္လို႔ပါ
ဒီတစ္ခါေတာ႔ CDMA 450 ဖုန္းေတြေတာ္ေတာ္မ်ားမ်ားကို Software ျပန္ထုပ္ျပီ ျပန္ေရးတဲ႔ နည္းေလး
ကိုေဖာ္ျပေပးလိုက္ပါတယ္ ဒီနည္းကေတာ႔ ကၽႊန္ေတာ္ သံုးတာေတာ႔ ၾကာပါျပီ CDMA 450 ဖုန္း
အားလံုးနည္းပါကို ရပါတယ္။ တျခား CDMA 800 တို႔ GSM ဖုနး္ေတြေတာ႔ မစမ္းရေသးပါဘူး
အရင္ဆံုးလိုအပ္တဲ႔ ဖိုင္ေတြကိုအရင္ေဒါင္ထားပါ ။

QPST    >>>  download  <<< or  >>>  download  <<<  
Driver    >>> download  <<< or   >>>  download  <<<      

ေဒါင္ျပီရင္ေတာ႔ စလိုက္ရေအာင္ Computer မွာ Driver ကိုအရင္ Run ထားပါ .။
အေပၚကေဒါင္ထားတဲ႔ QPST_2.7.323_(2008-09-19).rar ကိုျဖည္႔လုိက္ပါ Folder ထဲက Setup.exe
ကို Computer မွာ install လုပ္ထားပါ ။ install လုပ္ျပီရင္ေအာက္ပံုအတိုင္သြားပါ.။
Start ===> All programs ကိုသြားပါ.။

 QPST ===> QPST Configuration

.
ေအာက္ကပံုအတုိင္ေပၚလာရင္ Ports ကို ထပ္သြားပါ။
.
ဒီေနရာမွာေတာ႔ Phone ကို Driver သိဖို႔လိုပါတယ္ ။ Phone နဲ႔ Computer ခ်ိတ္ဖို႔အတြက္ ေအာက္ကအဆင္႔
တိုင္ ထပ္သြားပါ။
.
ေအာက္ကပံုအတိုင္ေရာက္ျပီဆိုရင္ေတာ႔ Show Serial and USB/QC Diagnostic ports only ကို
အမွန္ျခစ္ေလးကို ျဖဳတ္ေပးပါ။
.
.
ေအာက္ကပံုအတိုင္ေပၚလာျပီဆိုရင္ေတာ႔ Phone နဲ႔ Computer နဲ႔ ခ်ိတ္သြားပါျပီ.။

.ခ်ိတ္သြားျပီဆိုရင္ Start Clients ===> SOFTWARE DOWNLOAD ===>ကိုထပ္သြားပါ။
.
 ဒီအဆင္႔မွာက Phone နဲ႔ QPST Tool နဲ႔ ခ်ိတ္ဖို႔ လိုပါျပီ ။ QPST Tool နဲ႔ ခ်ိတ္ဖို႔အတြက္
 အေပၚကအဆင္႔ျပီသြားရင္ေတာ႔  Phone နဲ႔ QPST Tool နဲ႔ ခ်ိတ္ျပီပါျပီ ။ အရင္ဆံုး ကၽႊန္ေတာ္တို႔
လိုခ်င္တဲ႔ Firmware ေလးကို Backup အရင္လုပ္လိုက္ရေအာင္ Backup လုပ္ဖို႔အတြက္ Backup
ဆိုတဲ႔ ေနရာကို သြားပါ.။

.
 Browse ကေနသြားပါ File name ဆုိတဲ႔ ေနရာမွာ အဆင္ေျပမယ္႔ နာမည္ကိုေပးပါ
ျဖစ္နိုင္မယ္ဆိုရင္ေတာ႔ backup လုပ္မယ္႔ Phone Model နံပါတ္နဲ႔ Version ကိုေရးတာ ပိုအဆင္ေျပပါတယ္
ဥပမာ ။။  N79-C (QTM15_1_SPANSION_v1.5) ဒီလိုေလးေပါ႔။။

Save မဲ႔ေနရာကိုေရြးျပီရင္ေတာ႔ Start ကို နိပ္လိုက္ပါ ။ .
.
Memory Backup Completed ဆုိျပီျပရင္ေတာ႔ Backup လုပ္တာ ျပီဆံုးသြားပါျပီ။
Firmware ျပန္ေရးဖို႔ နည္းကိုေတာ႔ ေအာက္မွာဆက္ၾကည္႔ပါ ။
အရင္ဆံုး Restore ကိုသြားပါ Browse ကေန ပထမက backup လုပ္ထားတဲ႔ေနရာကို သြားပါ။
Save ထားတဲ႔ Backup ဖိုင္ေလးကို ေရြးေပးလိုက္ပါ။
.
ေရြးျပီရင္ေတာ႔ Start ကို နိပ္လိုက္ပါ .။ Firmware စေရးေနပါျပီ။
ျပီသြားရင္ေတာ႔ Memory Restore Completed ဆိုျပီျပရင္ေတာ႔ Firmware ေရးလို႔ ျပီပါျပီ..။။

အားလံုးပဲအဆင္ေျပမယ္လို႔ေမွ်ာ္လင္႔ပါတယ္။
အဆင္မေျပတာရွိရင္လဲ ေျပာခဲ႔နိုင္ပါတယ္။။။။
ref: http://mobilejuvenile.blogspot.com/